|
|
MITER CUTTER JIG / WATCH BAND JOINT CUTTER / HINGE TOOL /
SCHNIER CLAMP / SCHARNIERKALIBER
/ PROFILSPANNLEHRE /
BLOC À LIMER EN ÉQUERRE / UTENSILE A MORSA /
COUPES-CHARNIERES / SCHARNIERABSCHNEIDER /
HINGE CUTTER / PROFILE CUTTING DEVICE
 |
| PICTURE |
DESCRIPTION |
|
 |
S-467
MITER CUTTER JIG / TUBE, WIRE
& SHEET CUTTER / WATCH BAND JOINT CUTTER / SCHARNIERKALIBER
/ PROFILSPANNLEHRE
HARDENED
AND POLISHED, FOR SAWING OFF, LEVEL-VENAL AND DRAWING
OFF FROM HINGES.
SUPER HARD TOOL STEEL.
HARDNESS: 60-65 HRC
CUTTING ANGLES: 45º
& 90º
DIMENSIONS: 52MM x 48MM x 10MM
WEIGHT: 185GMS |
|
 |
S-466
MITER CUTTER JIG / TUBE, WIRE
& SHEET CUTTER / WATCH BAND JOINT CUTTER / SCHARNIERKALIBER
/ PROFILSPANNLEHRE
HARDENED AND POLISHED, FOR SAWING OFF, LEVEL-VENAL AND
DRAWING OFF FROM HINGES. COMES
WITH A LENGTH STOP, TO PERFROM REPEATED CUTS OF SAME
SIZE.
SUPER HARD TOOL STEEL
HARDNESS: 60-65 HRC
CUTTING ANGLES:
45º & 90º
DIMENSIONS: 52MM x 48MM x 9MM
WEIGHT: 180GMS |
|
 |
S-408
MITER CUTTER JIG / TUBE, WIRE
& SHEET CUTTER / WATCH BAND JOINT CUTTER / SCHARNIERKALIBER
/ PROFILSPANNLEHRE
HARDENED AND POLISHED, FOR SAWING OFF, LEVEL-VENAL AND
DRAWING OFF FROM HINGES.
SUPER HARD TOOL STEEL
HARDNESS: 60-65 HRC
CUTTING ANGLES:
45º & 90º
DIMENSIONS: 50MM x 40MM x 10MM WEIGHT:
160GMS |
|
 |
S-407
MITER
CUTTER JIG / TUBE, WIRE & SHEET CUTTER / WATCH
BAND JOINT CUTTER / SCHARNIERKALIBER
/ PROFILSPANNLEHRE
HARDENED
AND POLISHED, FOR SAWING OFF, LEVEL-VENAL AND DRAWING
OFF FROM HINGES. COMES WITH A LENGTH STOP, TO PERFROM
REPEATED CUTS OF SAME SIZE.
SUPER HARD TOOL STEEL.
HARDNESS: 60-65 HRC
DIMENSIONS: 73MM x 60MM x 11MM
WEIGHT: 365GMS
*
FEATURING 90º
/ 45º
ANGLES: CUTTING OF PROFILES, PRODUCTION
OF SQUARES
AND RECTANGLES
*
FEATURING 90º
/ 45º
/ 30º
ANGLES: ADDITIONAL PRODUCTION OF EQUILATERAL
TRIANGLES
*
FEATURING 90º
/ 45º
/ 30º
/ 60º
/ 54º
ANGLES: ADDITIONAL PRODUCTION OF EQUILATERAL
OR STRETCHED HEXAGON AS WELL AS GEOMETRIC FIGURES
WITH DIFFERENT ANGLES (I.E. RHOMBUS). THE 54º
ANGLE CAN BE USED FOR THE PRODUCTION OF EQUILATERAL
PENTAGONS
*
FEATURING 90º
/ 45º
/ 30º
/ 60º
/ 67.5º
ANGLES: INSTEAD OF 54º
THE ANGLE OF 67.5º
ALLOWS THE PRODUCTION OF EQUILATERAL OR STRETCHED
OCTAGONS. THIS PROFILE CUTTING DEVICE CAN ALSO
BE USED FOR THE PRODUCTION OF GEOMETRIC FIGURES WITH
DIFFERENT ANGLES
|
|
 |
S-406
LARGE FORMATION - JIG VISE MITER
CUTTER - 5 WAY
SUPER
HARD TOOL STEEL
HARDNESS: 60-65 HRC
CUTTING ANGLES: 60º,
45º, 90º, 135º,
120º
DIMENSIONS: 74MM x 51MM x 11MM
WEIGHT: 355GMS
THIS
IS THE LARGE FORMAT VERSION OF THE JIG VISE MITER CUTTER
S-405. TOOL HOLDS STOCK UP TO 1/2" THICK
SO YOU CAN FILE PERFECTLY FLAT 45º, 60º, 90º,
120º & 135º CUTS. THE LOWER OPENING
IS FOR MAKING 90-DEGREE CUTS; THE SECOND OPENING HOLDS
STOCK FOR MAKING 60º OR 120º CUTS, THE UPPER
OPENING HOLDS YOUR STOCK FOR MAKING 45º OR 135º
CUTS.
IT'S DIFFERENCE WITH S-405 IS OF DIMENSION & PROFILE
CUTTING SIZES OF RHOMBUS, RECTANGLES, OCTAGONS, SQUARES
ETC. |
|
 |
S-405
JIG VISE MITER CUTTER - 5 WAY
SUPER
HARD TOOL STEEL
HARDNESS: 60-65 HRC
CUTTING ANGLES: 45º,
60º, 90º, 120º, 135º
DIMENSIONS: 58MM x 48MM x 11MM
WEIGHT: 265GMS
TOOL HOLDS STOCK UP TO 1/2" THICK SO YOU CAN FILE
PERFECTLY FLAT 90, 60
OR 45 DEGREE CUTS. THE LOWER OPENING IS FOR MAKING 90-DEGREE
CUTS;
THE MIDDLE OPENING FOR 60-DEGREE OR 120-DEGREE CUTS
AND THE UPPER
OPENING HOLDS YOUR STOCK FOR MAKING 45-DEGREE CUTS.
SUPPLIED WITH
AN ADJUSTABLE STOP FOR MAKING REPEAT CUTTINGS OF THE
SAME LENGTH
AND A HEX KEY FOR FIXING THE STOP.
IT'S DIFFERENCE WITH S-406 IS OF DIMENSION & PROFILE
CUTTING SIZES OF RHOMBUS, RECTANGLES, OCTAGONS, SQUARES
ETC. |
|
|
|
|
